Hardwood Industries, Inc. www.hardwoodind.com 14 Stock Moulding & Components Hardwood Industries, Inc. hardwoodind.com SHELVING • Edgebanded on 1 long edge • Through (full) bore • Holes are centered on the board • 32mm between holes • 37mm from front edge to front holes • 37mm from back edge to back holes • 19mm (3/4") from top to top hole • 19mm (3/4") from bottom to bottom hole • 5mm diameter holes WHITE MELAMINE PRE-DRILLED SHELVING WHITE MELAMINE CLEATS " .018" .018" .018" .018" - Edgebanded on 1 long edge with matching .018" tape. WHITE MELAMINE " .018" .018" .018" .018" - Edgebanded on 1 long edge with matching .018" tape. IMPORT WHITE BIRCH PREFINISHED 2 FACE " .018" .018" .018" .018" - Edgebanded on 1 long edge with matching .018" tape. WHITE MAPLE PREFINISHED 2 FACE, LOWEMISSION 37mm 37mm 32mm 19mm 19mm These H.I. products are produced using low-emitting eco-friendly materials. Sizes available: • 3/4" x 12" x 96" • 3/4" x 16" x 96" • 3/4" x 24" x 96" Sizes available: • 3/4" x 12" x 96" • 3/4" x 16" x 96" • 3/4" x 24" x 96" • 3/4" x 12" x 120" • 3/4" x 16" x 120" • 3/4" x 24" x 120" • 3/4" x 12" x 144" • 3/4" x 16" x 144" • 3/4" x 24" x 144" SKUs: 34X12W2S, 34X12X121W2S, 34X12X145W2S, etc. • 3/4" x 3.5" x 96" SKU: 34X3-12W2SB2E Sizes available: • 3/4" x 11-3/4" x 96" • 3/4" x 15-3/4" x 96" • 3/4" x 23-3/4" x 96" 34X12WM2S 34X16WM2S 34X24WM2S SKUs: Sizes available: • 3/4" x 11-3/4" x 96" • 3/4" x 15-3/4" x 96" • 3/4" x 23-3/4" x 96" 18X12WB2S 18X16WB2S 18X24WB2S SKUs: 34X12W2SPD 34X16W2SPD 34X24W2SPD SKUs: .018" .018" .018" .018" • Edgebanded onthe 2 long edges.