White Oak Hardwood Industries, Inc. hardwoodind.com Hardwood Industries, Inc. www.hardwoodind.com Front Back Cabinet Prime grades NHLA #1C after H/M surfacing. The following specs improve or clarify H.I. brand vs. NHLA standards: Cabinet Prime is ideal for making cabinet doors and drawer fronts. Considered the high end of mid-grade lumber yielding 66-2/3% to 83-1/3% clear face cuttings with a minimum cutting size of 3" x 3' or 4" x 2'. Ideal for mid length clear 2 face, and heart 2 face cuttings that require a very high percentage of heartwood on both the face and the back of the board. Cabinet Prime (CAB P)) SKU: 44CPAWO(L) • Heart: Grade Face: 90% to 100% heart face after straight-line rip. Back Face: 70% to 100% heart face after straight-line rip. • Dimensions: Width 4" and wider, Length 4' to 16'. • Minimum Yield: 66-2/3% on both faces. • Surfacing: 80% or better clean at H/M on both faces. • Manufacturing: Not more than 1/2" of bow, side-bend, wave, or twist in 8' of length. • Splits: Maximum split allowed on each end is equal to the square footage of the board in inches. • Sticker stain: Not allowed on either face. • Color: Uniform within the cuttings. Material from specific regions and mills. • Trim backs: No specification.